If your AC is still not cooling properly even after servicing, the issue may not be simple dust or maintenance. In many cases, the real problem lies deeper in the system and requires proper diagnosis.

Here are the most common hidden reasons why your AC may still fail to cool effectively.

❄️ 1. Low or Leaking Refrigerant Gas (Most Common Issue)

Even after servicing, your AC won’t cool if the gas level is low.

Possible causes:

· Gas leakage in copper pipes

· Improper gas filling during service

· Tiny pinhole leaks in coils

Signs:

· AC runs continuously but no cooling

· Ice formation on indoor unit pipes

· Weak airflow with warm air

👉 Solution: Gas leakage test + proper refrigerant refill

🧊 2. Dirty or Blocked Evaporator Coil

Sometimes technicians clean only filters, not the internal coils.

Problem:

· Dust buildup blocks heat exchange

· Cooling capacity reduces significantly

👉 Solution: Deep chemical coil cleaning

⚙️ 3. Compressor Not Working Properly

The compressor is the “heart” of your AC.

Issues may include:

· Weak compressor performance

· Electrical fault

· Overheating

Symptoms:

· Outdoor unit running but no cooling

· Clicking or unusual noise

👉 Solution: Technical inspection or replacement if needed

🌬️ 4. Faulty Fan or Airflow Problem

Even if cooling is fine, poor airflow can make it feel like the AC is not working.

Causes:

· Indoor fan motor damage

· Blocked vents

· Dirty blower wheel

👉 Solution: Fan servicing or replacement

🔌 5. Thermostat or Sensor Issues

If sensors fail, the AC may not regulate temperature correctly.

Signs:

· AC turns off too early

· Room never reaches set temperature

· Inconsistent cooling

👉 Solution: Sensor calibration or replacement

⚡ 6. Wrong AC Size for Room

Sometimes the problem is not technical—it’s capacity mismatch.

Example:

· Small AC in a large room

· High heat load (sunlight, appliances, poor insulation)

👉 Result: AC works but cannot cool effectively

🧼 7. Incomplete or Superficial Servicing

Not all servicing is equal.

Common issues:

· Only filter cleaning done

· No gas pressure check

· No coil inspection

👉 Always ask for a full AC health check, not just basic cleaning.

🧠 Quick Diagnosis Checklist

Check these at home:

· Is outdoor unit running?

· Is airflow strong?

· Any ice on pipes?

· Is electricity voltage stable?

· Does cooling improve at night?

🧾 Final Verdict

If your AC is still not cooling after servicing, the most likely causes are:

👉 Gas leakage or low refrigerant (most common)
👉 Dirty internal coils
👉 Compressor or airflow issues

A proper technician diagnosis is essential—basic servicing alone is often not enough.

 

Disclaimer:

The views and opinions expressed in this article are those of the author and do not necessarily reflect the official policy or position of any agency, organization, employer, or company. All information provided is for general informational purposes only. While every effort has been made to ensure accuracy, we make no representations or warranties of any kind, express or implied, about the completeness, reliability, or suitability of the information contained herein. Readers are advised to verify facts and seek professional advice where necessary. Any reliance placed on such information is strictly at the reader’s own risk.

For more interesting updates wa click and follow Indiaherald WhatsApp channel

Find out more:

AC

Kokila Chokkanathan

11/04/2026 05:05 PM